Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

One of the best ways to upgrade your bike is to increase the shifting performance of your bike. We offer a wide assortment of drivetrain components to get you to that next level of shifting performance and reliability.

Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. PF30 Outboard Spacer Kit
$16.00
This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
TruVativ Chainring Chain Guard
$43.00
Protect your chainrings and ride aggressively with more confidence with TruVativ's high-quality machined chain guard. - Durable 6061-T6 Aluminum construction - Excellent for cyclocross use - Made to fit SRAM cranks - Protects up to a 52-tooth chainring
Sunlite Aluminum Low Profile Crankarm (Left)
$19.99
• Square taper interface • Only includes left crank • 175mm length
Sunlite Cottered Pin
$1.99
- Sunlite Cottered Pins
Shimano SLX M7000-2 Crankset
$129.99
- Solid pedaling efficiency - New 3D composite chain ring teeth composition is optimized for each chainwheel load out - Balance of strength and weight in 2-piece crank construction - Improved driving rigidity - Close ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Small ball bottom bracket - Series : SLX - Crank Construction: HOLLOWTECH II Technology - Bottom Bracket: BB-MT800/BB-MT800-PA - Chain Line: 48.8 - Average Weight: 788.7g (28-28T) 761.4g (36-26T) 739.8g (34-24T)
Shimano Ultegra R8000 Crankset
$270.99 - $276.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
SRAM NX 1x X-Sync Crankset
$125.00 - $156.00
The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately
SRAM RED 11-Speed Crankset
$439.00 - $476.00
Already a legend in its time, the SRAM RED crankset is now available with refreshed graphics to complement the SRAM RED eTap componentry. The SRAM RED crankset features a completely hollow construction all the way to the spider. Its hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. As always, for seamless, flawless performance and Yaw compatibility, pair this crank with X-GlideR chainrings. - SRAM Road 11-speed compatible - Compatible with SRAM RED eTap components - Exogram technology uses a large, hollow cross section all the way to the spider, minimizing weight while maximizing stiffness - SRAM's stiffest crank ever - Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance - Stiffer X-GlideR chainrings feature thicker construction and advanced shift timing pins and ramps, which are optimized for shifting with the Yaw front derailleur - Arm Material: Carbon - Chainring Material: Machined alloy - Weight: 557 grams (BB30 172.5mm 53x39 BB not included) - Compatibility: SRAM RED & SRAM Force Yaw Front Derailleur, SRAM RED 22 & PC1170 chains - Finish: Carbon - Bottom Bracket Compatibility: BB30, PressFit 30
SRAM S600 3.0 Crankset (42/32/22)
$45.00 - $48.00
SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Chainring Bolt Pack
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face Turbine CINCH Crankset
$299.99
- Intended for XC, Trail and Enduro use - Utilizes Race Face CINCH technology for interchangable spiders in 2X, 3X and direct mount chainring configurations, multiple spindle options and compatability across all relevant frame standards - 30mm spline interface machined from 7050 aluminum alloy - Removable spider offers the ability to convert between existing chainring standards while remaining flexible for future developments - Includes 68/73mm CINCH spindle and 22/36 ring configuration - BB Options: BB92, 68/73 BSA, 100mm BSA, PF30
Origin8 Double/Triple Chainring Bolts
$9.99 - $15.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Origin8 XLT Integrated Crank Cap
$2.99
Replacement dust cover for Origin 8 XLT Cranksets
e*thirteen by The Hive Chain Guide Lower Slider Kit
$12.95
- Lower slider replacement parts for E-13 chainguides
e*thirteen by The Hive Lg1+ Chain Guide
$119.00
- Adjustable wearplate with chainring size indicators allow for 28-38T chainring capacity and easy adjustment - Gen 2 Stealth Idler pulley for smooth and quiet operation - 28/30, 32/34, 36/38t direct mount bashguard included - ISCG-05/BB models include ISCG-05 to BB adapter plate - 136g (30t), 159g (34t), 167g (38t) - Range: 28-38t
e*thirteen by The Hive Spider Lockring
$14.95
- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212
Wolf Tooth Components CAMO Direct Mount Spider for Cannondale
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wolf Tooth Components CAMO Direct Mount Spider for Specialized S-Works
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$10.75
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$10.75
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 29mm ID x 2.5mm Crank Spindle Spacer, Bag of 5
$8.25
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin
Page 1 of 8 Next page