Filter By:
- Parts & Accessories (115)
- Cranksets (217)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cranksets
One of the best ways to upgrade your bike is to increase the shifting performance of your bike. We offer a wide assortment of drivetrain components to get you to that next level of shifting performance and reliability.
$2.00
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$2.49
- Preload collar for adjusting tension on bottom bracket bearings
- For Race Face 30mm Cinch System cranks only
$2.50
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$4.99
- Stock steel chainring bolts found on low/mid-range Race Face cranks
- For double cranksets
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
$5.99
Spacers to insure proper chainline and chainring spacing on your bike.
- 3.5mm thick
- Material: alloy
$5.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
$6.00
M8 Capless Crank Arm Bolt Kit
- For square-taper & Powerspline
$6.99 - $21.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
$7.99
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
$8.99
Various parts for repair and replacement on Odyssey cranks.
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
$8.99
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
$9.00
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks
- RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost)
- Mounts using a common Park BBT-22 tool
$9.99 - $11.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$9.99
Race Face Crank Arm Fixing Bolts
- M18 Crank Bolt
- Fits 15SX/Atlas/SixC CINCH
- Self-extracting
$10.49 - $11.99
- Chainring bolt sets are available in sets of four or five
- Bolts have 5mm hex heads
- Material: Steel
- Type: 2x
$10.50
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs
- Kits include chainline adjustment spacers
- 8/12mm button head bolts for single ring steel backplate guide applications
- 10/16mm flat head bolts for single ring alloy backplate guide applications
$10.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
$11.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
$11.99 - $23.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts.
• Set of 5 male/female bolts
• Inside measures 4mm when tightened, 7mm total height
$11.99
- Chainring bolt sets are available in sets of four or five
- Bolts have 5mm hex heads
- Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4)
- Material: Steel
- Type: 1x
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$11.99
Race Face Crank Arm Tab Spacers
• Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used
• Fits all Race Face cranksets
• Use double bolts
$11.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$11.99
- Material: Heat-treated 4130 Chromoly
- Splines: 8
- Diameter: 19mm
- Length: 5.7/8" (150mm)
- Spindle Bolts: 8x1mm (Included)
- Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
- For Descendant Carbon and non-Eagle XX1 and X01
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact.
- Injection molded plastic crank arm protection
- Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes
- Material: Injection molded plastic
- Recommended Group: XX1, X01, XX, X0
$12.00
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included
$12.95
- Lower slider replacement parts for E-13 chainguides
$12.99
Spacers to insure proper chainline and chainring spacing on your bike.
• 0.6mm thick
• Sold in a bag of 20 spacers
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
$13.99
Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.
$14.01
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 2.5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin
$14.99
Race Face Crank Arm Fixing Bolts
- M18 Crank Bolt
- Fits 15SX/Atlas/SixC CINCH
- Not self-extracting
$16.00
This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps
- HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm
- Hollow bolts (SH-21504) not recommended for non-treated spindles
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
$19.54
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin
$19.99 - $23.99
• Forged steel
• Square taper
• Compatible with 9/16" pedals
• Pairs
• Cotterless
$21.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications
- CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
$22.00
- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets
- Spacers and adapters only specific bottom brackets are required and sold separately
- Spindle Interface: SRAM GXP
$22.05
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
$23.09
• Square taper interface
• Only includes left crank
• 175mm length
Page 1 of 6
Next page