Safety

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

An incredibly loud brass bell (approximately 60 db) from CatEye meets their FlexTight mounting band for mounting versatility across all types of handlebars. The bright, clean sound of brass alerts other pedestrians and riders to your presence.

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for YouTube sound clips!

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Medium sized Bells with exciting and classic designs and fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.

- Fits 22-25.4mm Handlebars

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

CatEye's handlebar-end mounted mirror is sturdy and sure to last through heavy duty riding. It's fully adjustable so you can comfortably see what's behind you. This scratch resistant mirror installs easily and gives a wide-angle view.