Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Robert Axle Project Kid Trailer Thru Axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Burley Flex Connector Kit (Square Towbar)
$25.99
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Burley Steel Hitch
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Burley Thru Axle Adapter
$54.99
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
Thule Axle Mount ezHitch
$49.95
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Thule Bicycle Trailer Kit (Non-Chinook)
$119.95
Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.
Thule Bike Trailer Thru-Axle Adapter
$69.95
Thule's Bike Trailer Thru-Axle Adapters replace your 12mm rear thru-axle to let you connect your bike trailer to the bicycle.
Thule Chariot Jog Kit 1 - Lite/Cross
$129.95
Convert your Thule Chariot into a high-performance jogging stroller. - Simple installation by clicking the kit into Thule VersaWing - Convenient tracking adjustment to make sure the carrier tracks straight - Includes pocket for easy storage of the jogging wheel when not in use
Thule Chariot Jog Kit 2 - Lite/Cross
$149.95
Convert your Thule Chariot into a high-performance jogging stroller. - Simple installation by clicking the kit into Thule VersaWing - Convenient tracking adjustment to make sure the carrier tracks straight - Includes pocket for easy storage of the jogging wheel when not in use
Thule Chariot Ski Kit
$324.95
Convert your Thule Chariot multisport trailer into a cross-country ski pulk. - Includes two lightweight skis, two telescoping aluminum tow bars, padded waist belt with bottle holder and locking pin - Adjustable length of tow bars for ease of use - Child is off the ground for warmth and comfort - Simple installation by clicking the kit into Thule VersaWing
Thule Infant Sling
$99.95
Thule's Infant Sling fits inside Thule Chariot carriers (sold separately) providing a comfortable, secure way to carry your little one. It offers lateral support for excellent stability and is easy to install and remove. When used in a 2-passenger carrier, there's still plenty of room for a second child. Recommended for 1- to 10-month-old children, this handy accessory is ideal for strolling, jogging, and hiking.
Thule Thru-Axle Hitch Adapter
$69.95
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Surly Dummy Hitch
$325.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
Surly Grub Screw for Hitch Mount Nut
$8.00
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Axle Nuts
$35.00
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
Surly Trailer Skewer
$35.00
A skewer for your Surly Trailer.
Surly Trailer Stub Axle
$45.00
Surly Trailer Parts
Surly Trailer Thumb Screw w/Spring
$8.00
Surly Trailer Parts
Sunlite Axle Adapter Kit
$7.99
- Bolt-on Axle Adapter
Robert Axle Project BOB Trailer Thru Axle
$62.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project RAP Bobbins
$20.00
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
Benno Bikes Boost E Trailer Adapter
$57.99
Adaptors for Benno Boost E and Carry On allow for the use of Thule trailers.
Adams Adams 4 Piece Sleeve Set
$49.99
- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond
Adams Block/Sleeve Hitch
$49.99
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
Page 1 of 1