Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape
$549.99
Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.
$431.90
A new 35 mm high profile that makes the new Scirocco aluminum wheel unique. Aerodynamic yet easy to handle, responsive and lightweight yet with all the advantages of a clincher wheel with aluminum braking track. They are suitable for any kind of route. The Scirocco meets the needs of amateurs and "granfondo" fans, while giving heaps of rigidity when you have to get out of the saddle and sprint. - New 35mm aluminum profile guarantees better aerodynamic penetration - Grooves on the rim ensure low weight - Spokes stay in place thanks to the anti-spoke rotation technology system - MEGA G3 technology on the cassette side increases torsional stiffness - Hub in aluminum - Aluminum axles and nipples
$612.90 - $639.90
Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight. The well-known Ratchet System 24 makes the load distribution uniform, providing lasting durability
$119.99 - $189.99
- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt Disc mount - Sealed Bearings (DC711 & DHT148) - TA Axles, not incl. - Quick Release binder incl. (DC2241) - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)
$99.99
- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-M475 (Black), Shimano logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick Release binders included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)
$109.99
Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Formula DC-20 - QR 9x100mm (Quick Release binder included) - Anodized black with Laser Etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal Rear hubs options: Formula DC-22 (QR10x135mm) / DC-2241 (Boost QR 9x141mm) - Quick Release binder included - Anodized black with laser etched logo - 6-Bolt ISO disc mount - Adjustable bearings - Rubber seal - Compatible with 8-11 speed MTB (12 speed HG with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$99.99
- Affordable and reliable road rim brake wheelset - Silver rim, spoke and hubs for a classic look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Sora-grade RS300 hubs feature smooth, adjustable cup-and-cone bearings for long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-10 speed compatible Shimano HG freehub body. See "Documents and links" for more details on compatibility.
$319.99
Hand-built to A-Class specifications, the 350 wheels with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles
$389.95
Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts
$849.95
CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.
$1,288.00
Each component of this wheel has been optimized in the wind tunnel in order to improve its aerodynamic performance. It therefore delivers multiple benefits that can be noted on different routes, from the most demanding of sprints to relaunching after a bend, while still ensuring efficiency on the flat and now also suitable for the hardest uphill finishes! It is a turning point in the all-rounder segment: a truly multi-purpose wheel. The wheel features carbon rims with a unidirectional aerodynamic finish, new aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimising performance. The profile of the rim, which has an internal diameter of 19 mm, corresponds perfectly with 23 mm, 25 mm and 28 mm tyres. In addition, with the 2-Way Fit version, Campagnolo offers its tried-and-tested technology with full compatibility with clincher and tubeless tyres. While the key purpose of these wheels is to deliver extreme performance, safety is also guaranteed thanks to the G3 spoking system with double spokes on the left of the front wheel, to ensure balanced and safe braking in all conditions. - Hub/Brake Compatibility: Center-Lock Disc - Cassette Body Type: Campagnolo 10/11/12 Speed - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Tubeless Ready Clincher, Clincher
$675.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$675.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$89.99
- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC20 (Black), Laser etched logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)
$825.00
- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.
$925.00
- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.
$925.00
- The Ultra-light carbon XC wheel - Hookless rim wtih an internal width of 26mm, mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4”. - Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. - Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. - The ultra-light, yet durable, 370-gram rim measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. - These specs total up to a 1380-gram wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding.
$925.00
- Quest centerlock hubs, Pillar Wing 20 spokes, and external nipples for the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! - Wide rim platform for modern gravel tires. - Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go down to 353 grams in a 700c.
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$499.99
The disc brake road revolution has arrived. The EA90 SL Disc combines the stout 19.5-millimeter internal tubeless EA90 SL rim with Easton’s M1 6-bolt disc hubs that have received an A+ Future-Proof rating by Velonews. Hubs easily converts from out of the box 9x100 and 10x135 quick release to 15x100 & 12x100; parts sold separately. These wheels are light, fast and bombproof. Best of all, they rely on standard Sapim double-butted straight-pull spokes and straight-pull spokes and standard external alloy nipples, so they’re easy to maintain and service.
$649.99
The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.
$1,600.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
$1,400.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
$149.99
- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$114.99
- Affordable and reliable road rim brake wheelset - Silver rim, spoke and hubs for a classic look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Sora-grade RS300 hubs feature smooth, adjustable cup-and-cone bearings for long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-10 speed compatible Shimano HG freehub body.
$109.99
- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT400-B (Black), Shimano logo, 15mm E-THRU, O.L.D. 110mm BOOST - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)
$79.99 - $99.99
- Skyway's original Tuff wheel - Built to accommodate pneumatic or non-pneumatic tires
$124.99
Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: Shimano HB-M525, M9x100mm - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included Rear hub: Shimano FH-M525, M10x135mm - HG Freehub compatible with 8 - 10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples