Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

Sunlite Straddle Cable
$2.99
• Fits cantilever brakes • Sold individually
Sunlite Cantilever Link Wire
$2.99
- Replacement link wire for cantilever brakes
Sunlite Galvanized Brake Cable (Tandem)
$2.99
• MTB or Road • 1.5 x 2667mm • Galvanized
Jagwire Sport Inline Adjusters
$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
SRAM Road Disc Brake Hydraulic Line Kit
$47.00
Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Available in black - 2000mm hose length
Hayes El Camino Compression Fittings
$14.77
- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper
SRAM Cable Housing/Hydraulic Line Rotating Hooks
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other and making rattling noises, and they provide a tidy custom look, too.
Jagwire Frame-Mount Adjusting Barrels
$8.99
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
Jagwire M10 Adjusting Barrel
$19.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Origin8 Seat Binder Cable Hanger
$5.00
Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake
Jagwire Elite Ultra-Slick Stainless Derailleur Cable
$24.99 - $29.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
Jagwire Mountain Brake Inner Wire, Teflon Coated
$12.99
Pro level Teflon coated brake cables minimize friction to maximize snappy braking response. - Die-extruded and pre-stretched for smooth operation and durability - Stainless steel construction resists corrosion - Best used with Slick-Lube housing and nosed end caps - Double-ended SRAM/Shimano mountain and road compatible cable ends
Jagwire Mountain Pro Brake Cable Kit
$38.50
Jagwire's Mountain Pro Brake Cable Kit is the perfect way to upgrade your braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM mountain bike brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved braking performance. You'll also love that this kit is much lighter than what you had on your bike before. Plus, with all the small parts included in the kit it's easy to install.
Interloc Racing Design Double Housing Stops
$19.99
- Simple solution for frames that do not have housing stops - CNC aluminum with two housing stops per guide
Bontrager Tandem Derailleur Cable
$5.50
Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free
Shimano Ultegra SP41 Polymer-Coated Derailleur Cable Set
$44.99
Shimano Ultegra OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm
SRAM Professional Shift Cable System by Gore Ride-On
$65.00
SRAM's Professional Shift Cable System by Gore Ride-On is a nice upgrade shift-cable kit. It boasts 2 cables coated by Gore to be super smooth and their compression-free 5mm-diameter housing. You get ferrules and cable crimps, plus Gore's Grub Seal and MTB Grub Seal, too.
Origin8 In-Line Shift Cable Adjuster Kit
$7.99
Increase the precision of your shifting cables with Origin-8's Adjuster kit. From fine tuning on the stand to adjusting on the fly, these are a great addition to make sure that the shifting of your derailleur is always spot on. • Micro adjustment for shifting precision • To be used right inline with shift cables • Set of 2
Origin8 Pro Pulley Cable Guide
$11.99
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
Origin8 Brake Cable Hanger (1 1/8-inch)
$11.99
Origin-8's Threadless Fork Cable Hanger provides a clean and functional way to route the front brake cable on your ride. It provides a 34mm cable stop drop down and a barrel adjuster so that you can adjust your stopping to perfection. • Fits 1-1/8th-inch threadless fork steer tubes • Includes barrel adjuster • 34mm cable stop drop down • Anodized finish
Origin8 Rear-Mount Brake Cable Hanger
$9.99
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. • Forged aluminum construction • Mounts to most frame mounting holes • Great for tricky cantilever brake setups • Lightweight design
Jagwire Alloy Straddle Cable Carrier w/Liner
$12.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
SRAM Stainless Derailleur Cable
$6.00 - $7.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
Odyssey M2 Brake Cable
$5.99
Compatible cable for M2 Monolever.
Origin8 Fork-Mount Brake Cable Hanger
$11.99
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount
SRAM Stainless Brake Cable
$6.00 - $9.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
SRAM Line/Housing Frame Protector Rubber
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
SRAM Inline Barrel Adjuster
$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
Jagwire Mountain Pro Quick Fit Adapter (Shimano)
$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Jagwire Double-End Straddle Cable, 1.8 x 380mm
$9.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
Page 1 of 7 Next page