Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$26.99
For proper assembly. - For use with 2008-09 6-Series, 2008-10 5-Series, 2008-2011 4-Series Madones, District Carbon - Durable steel bearing housing
$44.99
Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks
$42.00
Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks
$7.50 - $14.99
Trek proprietary suspension hardware. - Refer to Service Manual for assembly instructions and service - Sold individually
$4.99
For proper assembly. - Fits any Trek frame with open groove guide design - For specific compatibility concerns, please contact our Customer Service team
$8.50
Trek proprietary suspension hardware. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team
$24.99
Don't be left hanging. - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Works with all drivetrains - 30mm washer provides full coverage over ABP bearing seals - Included attachment hardware is reverse threaded
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
$31.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
$41.99 - $48.99
Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability. - 1/8" size, includes 98 links and 2 master pins - Colored chains are Teflon coated for low friction - Compatible with 8T driver and up - Links (links): 98 - Color: Pink - Width: 1/2 x 1/8" - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes
$8.99 - $17.50
- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.
$7.99 - $17.50
- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable
$12.99
- High Performance Brake Pads - Disc Pad Material: Organic
$39.99
Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour
$39.99 - $45.00
Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour
$59.99
Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour
$15.99
Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts
$17.99
Flat mount rear adapter for a 160mm rotor
$69.99 - $74.99
TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$69.99
KEY FEATURES: - Fits Scott Addict CX Addict CX MY16, 1 1/8" - 1.5" Tapered, Drop-In, IS42/28.6 | IS52/40, Alloy, sealed cartridge, 8.7mm stack height. BEARINGS: Sealed cartridge bearings FEATURES: For Scott Addict CX MY16 Bikes
$39.99
KEY FEATURES: - Fits Scott Addict family MY22 Replacement headset for the Scott Addict product family Model year 22 onwards. BEARINGS: Sealed cartridge bearings FEATURES - Compatible with Addict product family MY22
$44.99
KEY FEATURES: - Fits all standard 1 1/8" Standard 1 1/8" Press Fit, ZS44/28.6 | ZS44/30, Alloy, sealed cartridge, 12.9mm stack height. BEARINGS: Sealed cartridge bearings FEATURES: - For standard 1 1/8" steerer tube forks - Press Fit - ZS44/28.6, ZS44/30 - sealed cartridge bearings
$59.99
KEY FEATURES: - Fits Scott Genius My18 onwards Genius 1 1/8"—1.5" Tapered, Press Fit, ZS44/28.6 | ZS56/40, Alloy, sealed cartridge BEARINGS: Sealed cartridge bearings FEATURES - For Scott Genius MY18 Carbon - Including plastic topcap with L-shape
$36.99 - $47.99
- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel
$18.99
This is Surly’s 29 x 3-inch Presta valve tube. It fits their Knard tires and is made of butyl rubber.
$56.00
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)
$9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
$19.99
• Square taper interface • Only includes left crank • 175mm length
$2.99
- Shell: 8mm flanged axle nut - Flanged
$19.99
•Side pull brake •Aluminum construction •Brake only •66-95mm
$2.99 - $3.79
- Replacement link wire for cantilever brakes
$7.99 - $21.99
- DT Swiss cartridge bearings - Sold in pairs
$40.39 - $47.19
• Steel • 8-speed
$20.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
$7.99 - $9.99
Yep, these are the same old-school grips from back in the day. Now you see them on skinny-barred messenger fixies from NYC to San Fran. Sunlite's Classic grips come in a rainbow of colors to match any scheme on any bike. The large pads provide fat cushion for your hands and the soft rubber gives you a slip-free grip.
$17.99
- Chrome plated steel body and cage - Built in reflectors
$2.39
- Sunlite Cottered Pins
$28.99 - $29.99
- Cruiser tire intended for everyday use - CB - Cable Bead, type of bead found on economically friendly folding tires that provides a durable, easy to install tire bead - 30 TPI
$3.99 - $46.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
$8.99
- Smaller grips for smaller hands in a comfortable and fun dinosaur print - 97mm length
$69.99 - $79.99
- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm
$20.99 - $27.99
- Street urban comfort tire w/smooth center grooved for traction & lateral knobs for grip - Wire bead
$17.99 - $21.49
- Classic MTB tire with large, widely spaced knobs - Excellent for use on hardpack
$22.99
MTB tire suitable for road use with shallow, raised center knobs. - Type: Mountain - ISO: 507 - Bead: Wire - PSI: 40 - Weight: 1013
$22.99
- Tire with medium-depth, directional tread suitable for road, light trail use - Size: 22 x 1.75
$10.99
- Weather resistant - Long lasting neoprene foam - Ergonomic design - Length: 125mm
$16.39
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
$19.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
$9.99
- Replacement steel quick release skewers
$39.95 - $44.79
- Steel body - Chromoly spindle - Sealed bearings - Repair BB designed to work in frames that have stripped BB threads - Shell: 68mm - Spindle Type: Square Taper JIS - Weight: 360-370 grams
$8.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
$26.99 - $31.99
Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.
$30.99 - $41.99
- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams
$4.39
- Chrome allen seat binder bolt
$19.99 - $24.89
- Durable mud tire with tall, aggressive lateral knobs - Wire bead
$9.29
- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm
$9.29
- Valve type: Presta - Valve core: Removable - Butyl rubber
$7.49 - $15.59
- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm
$6.89 - $6.99
- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm
$6.89 - $37.49
- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm