Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$15.95
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
$57.95
When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.
$43.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP).
*The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets.
- Comfortable T-handle
- Replaceable driving pin (CTP)
- Investment cast steel body
- Adjustable locating shelf
$24.95
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
$39.99
The ultimate trail-side companion.
Details
- 20 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Chain Tool: 8/9/10/11/12 speed compatible
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Open Wrench: 8mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener
- Spoke Wrench: #0, 1, 2
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 203g
$5.49 - $131.76
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task.
- Award-winning and universally loved
- Molded box construction and proprietary plastic blend makes these the strongest levers available
- Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping
- Bold shape makes it easy to remove the tightest of tires without bending or breaking
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head.
• Presta valve
• 90 degree inflator works with most pump heads
$34.99
- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.
$5.95
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
$5.95
• Updated to be stronger, smoother, and more versatile
• Features a new material and redesigned tip for easier entry into just about any tire, including tubeless
• The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed
• This set includes 3 tire levers
$36.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$19.95
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
$43.95
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
$28.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
$29.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m17 includes:
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Open wrench: 8mm, 10mm
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 168g
Warranty: Lifetime
$5.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The Chain Gang includes:
- CM-5.3 Cyclone Chain Scrubber
- GSC-1 GearClean Brush
- 8 oz. bottle of Bio ChainBrite
The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$49.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8
- TX wrenches 10, 25
- PH1 screwdriver
- Chain tool
- Schrader & Presta valve tool
- Flat screwdriver 1.0 x 5.0
- Spoke Key 3.3, 3.45 and DT
$16.95
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$29.95
A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation.
• Made of a rubber-like PVC
• Cleans easily and looks great on any bench
• Measures: 14.7” x 7” (38cm x 18cm)
$10.95
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
$74.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal.
- Pack of 10, fits 9/16" pedals.
$18.50
Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups
- Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups and other cartridge bottom brackets.
- Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise.
- Professional quality, precision sized for the perfect fit.
Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The updated Splined Bottom Bracket Socket features a square 3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.
$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$116.00
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$36.99
- Takes place of rear wheel providing tension on chain to protect the frame when rear wheel is removed for cleaning, storage, or transport.
- Allows full forward or backward rotation of drivetrain and shifting through full range of gears.
- Quick and easy one-handed installation on standard QR style dropouts and removable pulley wheel works directly on 12mm thru axles.
- Professional grade stainless-steel, aluminum, and solvent resistant plastic components ready for daily life in the wash bucket.
The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The new Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.
$14.00
The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. This 6mm L-Handle Hex Wrench is designed to create optimal torque for pedals, thru-axles, and cranks. An extra deep contact arm, long lever arm, and ergonomic file tread grip promotes control and comfort during high-torque applications. These Hex wrenches also have a convenient ball end for off-axis access to bolts and higher-speed installations. Available individually and as part of our curated, portable Team Edition Tool Kit.
Features:
- 6mm long L-handle Hex wrench.
- Ergonomic file tread grips promote control and comfort – preventing hand fatigue in high torque applications.
- Extra-long contact arm for hard to access, countersunk hardware.
- Hardened CRV tool steel keeps contact points precise and consistent.
- Long lever arm for control during high-torque adjustments.
- Ball-end hex wrench short end for when speed is beneficial.
$77.99
• For adding or replacing cage & rack mounts
• Inserts are 10 to a bag
Page 1 of 40
Next page