Filter By:
Parts & Accessories
$69.95
Thule's Bike Trailer Thru-Axle Adapters replace your 12mm rear thru-axle to let you connect your bike trailer to the bicycle.
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer.
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$25.99
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike.
Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch.
If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
$49.95
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
$119.95
Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.
$29.95
Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.
$69.95
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
$325.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well.
Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
$36.00
This is our Excellent Adventure Thru-Axle. It upgrades your bike's rear end for hauling cargo trailers, should you feel like taking Rufus along on your errands. Extensive product testing with our Bill and Ted Trailers provided an "awesome experience," but time travel remains a risky endeavor.
Designed for use with slotted horizontal or vertical single-position dropouts, the Excellent Adventure Axle is compatible only with 12 x 148mm hubs.
Compatible Surly models include Skid Loader, our compact electric cargo bike, as well as Karate Monkey, Krampus, Grappler, Ogre, Lowside, ECR, and Troll. Once again, the 12 x 148mm hub requirement cannot be overstated. Visit your local Surly dealer to discuss other scenarios you may have in mind.
- 12 x 148mm hub compatibility only
- Designed for use only with Surly's Bill and Ted Trailers
- Works with slotted horizontal or vertical single-position dropouts
$8.00
Surly Trailer Parts
- Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
$35.00
Surly Trailer Parts
- These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts
- They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
$325.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
$25.00
The Robert Axle Project QR Hitch Adapter is a high quality, finely machined hitch adapter for towing single-arm trailers on bikes with 5mm quick release rear axles.
Our stainless steel, QR Hitch Adapter helps trailer hitches fit more bikes, easily clearing hooded and interfering dropouts.
Easy to install, by simply replacing the QR nut.
Our adapter uses a 5mm hex to ensure your hitch and pre-cious cargo are more securely attached than other knurled adapters. The 5mm hex also isolates and protects dropouts from marring and over-tightening of the quick release when installing the hitch.
Page 1 of 1