Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$19.99
Lost or need to replace your wheel block for the Wahoo KICKR SNAP? This accessory is designed to keep your bike stable and level while using the SNAP indoor trainer.
$34.99
This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR.
Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$79.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.
$80.00
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style.
- Active feedback
- A tuned ride
- Reduce fatigue, go longer
- KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.
$85.95
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours.
- Dual band technology
- Real time heart rate and calorie tracking
- Advanced performance material
- USB rechargeable battery
- LED indicator lights
- Two adjustable bands included
- Third party app compatibility
- Apple watch and apple TV integration
$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
$19.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$24.99
$29.99
17% Off
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$26.99 - $59.99
$39.99 - $59.99
Up to 33% Off
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$39.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
$49.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$79.99
$119.99
33% Off
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$79.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm
$110.00
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
$129.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
$169.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds.
The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store.
The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers:
- T1980 Bushido (ANT+)
- T2020 i-Genius
- T2050 Tacx IRONMAN trainer
- T2060 Tacx IRONMAN Smart
- T2080 Genius Smart with Upgrade Smart
- T2170 i-Vortex
- T2180 Vortex Smart with Upgrade Smart
- T2240 Flow Smart with Upgrade Smart
- T2780 Bushido Smart with Upgrade Smart
$9.29
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$29.79
• Plastic riser block allows the position of front wheel at one of two heights
$19.98
$39.99
50% Off
Keeps corrosive sweat from reaching your frame.
- Cell phone pouch included.
$24.99
$39.99
38% Off
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$29.99
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more
$36.99
$79.99
54% Off
Protects your floor from sweat and bike grime.
Product Features:
- Protects your floor from sweat and bike grime.
- Keeps your trainer from "walking" during intense workouts.
- Durable construction absorbs vibration and noise.
- Training mat measures 65 x 36 inches.
- Black PVC foam gives the training mat superior sound absorption.
- Resistant to moisture, and easy to clean with soap and water when necessary.
$39.99
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$59.99
Adapts a thru axle hub bike for a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.00 & 1.75
What's Included:
- Thru axle
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$59.99
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch
$129.99
Everything you need for the best indoor trainer experience possible.
- Can be used across a wide range of trainer setups.
- Includes Trainer Mat, Climbing Block and Saris towel.
$359.99
Trainer Mission Control
Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland.
And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one.
- Stay Charged: built-in power strip keeps training necessities nearby and powered up.
- Pick Your Height: adjustable for wide range of bikes and training configurations.
- Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride.
- Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing.
- Enhanced Experience: a great addition to indoor training.
Specs
- Base: 13-inches wide x 36-inches Depth
- Desk Top: : 12-inches Width x 20-inches Depth
- Adjustable Desk Height from Floor: 40- to 55-inches
- Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware
- Cord Length: 6- foot AC cord
- Built-in power strip with 2 AC and 2 USB outlets
- Built-in cord retention clips for easy cable management and a clean look.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$13.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura.
- Alloy clamp for mounting your own device on handlebar or stem
- Lightweight and rustproof aluminum construction
- Hex wrench required for instillation and removal
- Clamp body has (1) M5 Thread hold in center
- 22.2 mm-28.6 mm diameter range
$16.99
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths.
- Fits under front wheel to level the bike to get natural riding on training
- Double grooved design fits your narrow or wide ties
- Polyethylene material minimizes weight at 1/2 lb.
- 8.6D X 4.7W X 2.75H (inches)
$36.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage
$170.00
You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory.
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience
- Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for use and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- 3-Year Warranty
$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly
- Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6%
- Anti-slip rubber feet eliminate handlebar vibrations
- Internal design that guarantees maximum wheel stability
- Suitable for both road and MTB
- You can attach to the trainer frame when not in use for easy transport and storage
$44.99
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
$59.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house.
Dimensions: 1.8m x .9m
$59.99
Protects the bicycle from sweat and avoids corrosions or rust.
- Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish
- Sits above the top-tube and can be adjusted for different bicycles
- Washing-machine friendly
$79.99
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano).
- Compatible with 12 speed cassette.
$89.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer.
- Reads data based on the type of trainer used.
- Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices.
- When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
$99.99
The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position.
Compatible with tires up to 56mm wide
$17.49
$24.99
30% Off
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
$29.99
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
$59.99
- Adapts a thru axel hub bike for a trainer.
- Only compatible with current classic series trainers.
- Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch
- Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer.
- The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Page 1 of 1