Charged to be seen! The TailLux 25 USB design features convenient cable-free charging with a direct USB port plug. Two super-bright LEDs provide 25 lumens and three light modes, so you can be seen up to 2km away—even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap, making it simple to use on seatposts, seatstays, or Topeak bags. - Max Luminous Intensity: 25 Lumens - Lamp: 2 super bright red LED's - Light Housing: Engineering grade polymer - Battery: 3.7 V 320mAh Lithium Ion (integrated) - Control/Burn Time: 3 modes / 3 hr (High) / 30 hr (Low) / 40 hr (Blinking) - Charging: USB port / 2 hr - Mounting: Fits aero or round seatposts (25.4 – 34.9mm), seatstay, and Topeak bags - Waterproof IPX 6 - Size: 6.3 x 2.7 x 2.5cm / 2.5" x 1.1" x 1" - Weight: 30g / 1.06oz (w/ mounting clip)
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
• 180 hour run time • Includes one 2032 button cell battery • 4-Super bright LED`s • Multi-fit QR seat post mount • 2 mode (steady / flashing) • ROHS Certified • Water resistant
- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8
- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating
- USB multi-purpose safety light can be used on clothes, helmets, or bikes - 360° bracket allows multiple mounting options for a variety of applications - 25 lumen output through 9 COB chip LEDs - 5 modes offer day and night uses - 4 to 6-hour runtime
Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes almost everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.
• 5 LED rack mount rear light • 4 modes (1 steady 3 flashing) • Bolt-on mount for rear racks
- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator
- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant
- High brightness 16 chip COB style LED light - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 30 - Mount: rubber strap
- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included
- COB style LED rear safety light in the shape of a heart - Perfect for cruisers, kids bikes or anyone that is feeling the love and desires a little extra flair on their ride - USB rechargeable with integrated low battery indicator Modes: 5 Mount: Rubber Strap Rechargable: USB Lumens: 15 Lumen Range: 1-100
• 2 x 0.5 watt super bright red LEDs • Built-in Li-Ion rechargeable battery • 2 mode (steady / flashing) • 2 to 4.5 hour run time • Includes USB charging cable • Multi-fit QR seat post mount • Water resistant
- 6 lumen LED safety light - Built-in Li-Ion USB rechargeable battery - 2.5 ~ 10 hour run time per charge - Charging and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant
- 5 super bright LEDs - Built-in Li-Ion rechargeable batteries with USB cable - 2.5 ~ 5 hours run time per charge - 3 modes (2 Steady, 1 Flashing) - Multi-fit silicone strap - Water-resistant silicone body - Rechargable: USB
• 2 x 0.5 watt super bright red LEDs • 3 modes (1 steady 2 flashing) • Multifit bracket (25-32mm)
- Flat COB chip rear LED light with 38 individual COB chips - USB rechargeable 300 mAh li-ion polymer battery - 7 modes including a high and low setting and 5 flashing settings - Daytime flash modes enhances safety in any conditions or time of day - Low battery warning and battery capacity indicator (double click button to check) - Mode memory and tool free installation - Mount: seatpost - Lumens: 20
- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap
- USB-rechargeable rear light with 42 COB LED chips - 7 different modes featuring two steady modes and 5 flashing settings - Innovative quick-release bracket can be attached to seat posts or helmets - Low-battery warning and integrated battery protection - Weighs only 26 grams
Get that roadster night-ready with this fender-mounted taillight. Designed to fit perfectly on any of our Pure City fenders, so you can boost your visibility without cluttering up your ride. - Fits any Pure City Step Through or Classic - 2x AA batteries not included - The integrated cage is both visually pleasing and functional as it protects the light should your ride fall over - 5mm LED with built in reflector housing pulls double duty to help keep you seen and safe
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system
Page 1 of 5 Next page