Parts & Accessories

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

Bontrager Quick Connect Water Bottle Mount

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!

Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

All metal cup made of 304 Stainless Steel.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

- Insulated koozie designed for 12 oz cans - Made for Origin8 by Bomber Jacket - Made of Premium 4mm neoprene - HD dye-sublimation print for long-lasting graphics - Reduces rate of warming by 50% - Collapsible design - Gold Alloy Zippers - Color: Speed

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included

- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts

- Customize your race belt with our removable micro race locks with quick release clasp - Fully adjustable race bib toggles - Hi-viz reflective accents - Compatible with all Ergo & Ultralight Belts

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Clamp your water bottle cage securely to your handlebars with Electra's Bottle Cage Adapter. Easy installation and universal bottle cage compatibility make this accessory a no-brainer. • Allows for the installation of bottle cages on bicycles without frame mounts • Mounts to handlebar • Bottle cage sold separately

Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir - Blaster high-flow bite valve w/shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside the pack - Molded 3D bottom for much better drying between rides

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.

New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.

Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade

Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week.  Repurpose Green Sustainability Badge: Made with safer chemicals.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge. 

Keep your tube close and hydration on-tap with the Magnetic Tube Trap.

New design ensures unrivaled fitness and cycling performance with proven hydration functionality.

Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.

Keep your reservoir funk-free with this cleaning brush kit from CamelBak.

Dry your reservoir quickly with the CamelBak Reservoir Dryer.

Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo